-
What are the introductions and classifications of toggle switches?
Release time:2025-04-15 News section:Company News
-
Note 1:
In daily household use, there are often situations where some switch buttons protrude and cannot be pressed. This is usually due to frequent use of the switch, which may damage the internal spring of the switch. Therefore, it is only necessary to replace the spring to avoid unnecessary loss and cost of the touch switch.
Note 2:
The touch switch in the home should prevent children from frequently touching the switch button due to their mobility. If the button cover of the switch falls off, some of the internal circuits of the switch will be exposed. If accidentally touched, it may cause electric shock accidents on the spot. So everyone should pay attention to this point, and when the switch is not necessary, try not to press the button switch too much.
Note 3:
The force of the touch switch on the touched button should not be too strong, otherwise it will cause damage and deformation of the internal metal spring of the switch, such as the button being unable to be pressed, or the button protruding and not responding, and other problems.
Note 4:
Under normal circumstances, do not touch the switch multiple times as it may cause the switch to fail to sense and reduce its sensitivity.
Note 5:
When using switches in some high-power electrical appliances, attention should be paid to the heat dissipation of the switches. Because when these appliances are used for too long, their high power and current operation will cause the temperature of the environment to rise. If the heat dissipation of the switch is poor, it will directly cause the switch to overheat and be damaged. Therefore, when the appliances are used for too long, they should be stopped and rested for a few minutes to allow the temperature of the switch to dissipate before continuing to use.
Note 6:
When soldering a tactile switch, be careful not to add too much solder to the switch surface. If there is too much oxide on the tin surface, it may cause the adjacent tin to be too tight, which may result in unstable or virtual soldering of the switch pins and circuit board.
Note 7:
Switches are used in household appliances such as washing machines, induction cookers, and water heaters. It is important to be careful not to allow water to enter the interior of the switch and the contact points of the feet. Otherwise, the switch will form an oxide layer, causing a short circuit. Or it may cause the switch to malfunction
部的元件受潮而失效的等故障问题。
-
Relevant content
Related information
-
-
What factors should be considered when choosing a switch?
Choosing the appropriate switch for specific application requirements requires consideration of the following different factors:Switch type:What type of switch do you need? Is it a micro switch or a s
-
The three major functions of toggle switches! Do you know?
As the name suggests, a toggle switch is a type of switch that can be used to turn on and off electrical appliances with just a gentle touch. This type of switch is now widely used in computer mice an
-
What are the requirements for a circuit with a touch switch?
The working state of the tactile switch circuit must pay attention to temperature. The influence of temperature on switches plays a very important role. At a reasonable and appropriate temperature, we
-
How to choose a waterproof boat type switch method?
Teach you how to choose a waterproof boat switch method? Waterproof boat type switch, as the name suggests, is a boat type switch that can be applied in humid environments or operated by wet hands. Th
-
